Intex Aqua Desire HD Flashing Tool Driver and Flash File

Posted in

No comments

Friday, 3 June 2016 By naeem

Intex Aqua Desire HD Flashing Tool Driver and Flash File 

This tutorial tested by me without any problem i was done this job in this device when i started then in problem of hang on logo so first i try with hard reset but not start properly some time device was started but some error coming on display like not unsupported or other error so better is try to flash it's best way because your time save otherwise time waste before use this tutorial first carefully read all content because if direct start process and some one missing then you can't flash it or before use check all are required in below mention it's all are working well if any issue then you can't solve problem of software related now let's see stock rom firmware description.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua Desire HD Stock Rom Download here

Intex Aqua Desire HD Flash tool Download here

Intex Aqua Desire HD USB Driver Download here

Requirement for Upgrade:

1. Intex Aqua Desire HD Device

2. Intex Aqua Desire HD Stock Rom

3. Intex Aqua Desire HD Flash tool

4. Intex Aqua Desire HD USB Driver

5. Micro usb cable

6. Computer or Laptop

Method:

1. Download stock rom firmware from above link ( if link not working just leave your comment)

2. Unzip from winzip to desktop or as you like path (must be installed winzip)

3. Open SP Flash tool folder and choose flash_tool.exe file and open it

4. Click on Scatter-loading button and choose MT6592_Android_scatter.txt file and then click OK

5. Wait until read stock rom firmware

6. Now click on Download button

7. Press and hold Volume Up button and Insert usb cable

8. Wait until auto driver installing if not installed then manual update from above link

9. After driver installed device will detect with pc and flash tool

10. Wait until full process (do not disconnect device while flashing mode)

11. Congratulation you are done

 

Related posts

Share this post

• Share on facebook
• Tweet it
• Digg This
• Save on del.icio.us
• Stumble this